Disconnect power supply before opening.
The spice grinder materials ready for grinding must be dry. And wet, moisture or oil materials are not suitable to be grinded into powder.
Each input material shall not exceed the rated weight or half capacity of crush cabin so that there is enough space for powder.
After switch on, if finding the material is wet or excessive in weight, it will jam the blade and stop the motor by giving warning noise.So must plug out immediately to prevent motor from being damaged. And remove the jammed object. Then restart grinding.
The spice grinder grinding work usually needs 30 seconds to 1 or 2minutes. Over time working will cause bearing overheating.
1. If you have any question about the product,we would be more than happy to serve you! Wish you have a good shopping experience.
2. Chromatic aberration may occur due to the imaging principle of the display and different shooting results.
3. Manual measurement, error 1-3cm, depending on the actual situation, please understand.Thank you!